Description

Color: Brushed Finish
Material: Marble
Product Dimensions: 19.7″L x 7.1″W x 33.1″H
Finish Type: Brushed
Brand: KES
Installation Type: Freestanding
Shape: Rectangular
Item Weight: 8.4 Pounds
Manufacturer: KES Home

Thick, Heavy Base – Keep Stable: KES marble base is 8.23lbs/3.75kg, 2kg heavier than similar products. Its thickness of 0.8″ (3cm) ensures stability as a towel racks for bathroom freestanding and allows for easy placement anywhere without the risk of tipping over.
Upgrade Steady T-bars Design: KES provides gaskets and rubber rings for secure fixing of T-bars to the marble base. No wobbling or damage caused by loosening accessories. Enjoy long-term stability and easy access to towels.
Large Yet Compact – Fits Small Space: Our 10.6″ L x 7.1″ W (27x18cm) base is a massive design for increased stability. The rectangular base fits into tight spaces in small bathrooms. Make the most of every inch with this stable and efficient solution!
Better Rust-resistance: The T-shape towel bar is constructed of pro-grade 18/8 stainless steel, protecting against rust and corrosion while keeping your towel clean and tidy. Ideal for humid environments such as bathrooms and outdoors.
Anti-Slip: There are five circular paddings and you can stick them on the marble base to prevent the towel rack stand from moving out of place. Moreover, padded bottom can keep your floor free from scratches.
Easy to Assemble: No drill holes needed! Just place the marble base on a flat surface and install the T-shape bars by tightening the screws onto the bottom of the marble base. Then you can easily place the bath towel holder anywhere. Note: Screws are pre-installed.

Reviews (0)

Rated 0 out of 5

0 reviews

Rated 5 out of 5

Rated 4 out of 5

Rated 3 out of 5

Rated 2 out of 5

Rated 1 out of 5

Reviews

Clear filters

There are no reviews yet.

Be the first to review “KES Brushed Finish Towel Rack 2-Tier with Marble Base, CE Certified, Stainless Steel | BTH217-2”

FAQ

Sink Faucets

FAQ

Fixing The Faucet's Leaking Issue

From Cartridge

*Cause*	*Remedy*
Cartridge nut loose	Tighten cartridge nut. Click For *Video*
Cartridge damaged	Contact KES for replacement

*Cause*	*Remedy*
Spout damaged	Contact KES for replacement

*Cause*	*Remedy*
Aerator gasket installed improperly	Reinstall aerator
Gasket lost	Use spare gasket or Contact KES for replacement
Gasket aging/damaged	As above

Correct installation tip

*Cause*	*Remedy*
Centerbody damaged	Click For Videoto check.Contact KES for replacement
Supply hose/ Joint of quick connect hose damaged	As above

The problem still exists or No after-sales information you need? Contact KES: [email protected] or click to Chat now!

No Or Low Water Flow

① Low Water Pressure/Plumbing Clogged

Disconnect the supply hose and check if the water flow from the home plumbing is low. If so, contact a plumber for an inspection.

② Supply Hose Kinked

Fold supply hoses as shown below: Use model L4150 as a demonstrated

③ Clogged Aerator

Click For Video:

Operation video by using Aerator Wrench for L3156/L4150/L4350
Operation video by using Adjustable Wrench for L3156/L4150/L4350
Operation video for L4117/L4317

Using Aerator Wrench

Using Adjustable Wrench And Towel (Anti-scratch)

- - Some models do not include the Aerator Wrench and 2.2 gpm spare aerator.
  - Contact KES to obtain a replacement kit for the aerator if needed.
  - Please check your local plumbing codes to ensure compliance before making any changes.

Contact KES for replacement.

The problem still exists or No after-sales information you need? Contact KES: [email protected] or click to 🔗Chat now!

Installation Problem

- Remember to flush the plumbing pipes to clean any debris or sediment by letting the water run for a few minutes.
- Turn off your sink water supply while installing.
- Not for bathtub use.

Click For Operation Video

Use model L4350 as a demonstration

For model Z504，KES supply two quick connectors（Size:1/4”&3/8”）

Installation Tips

Remove the blue clip on the quick connector.
Tighten the connector by hand. * Do not use a wrench as it may cause damage to the quick connector.
Put the blue clip back on after inserting the water supply line.

Hose too short

For supply hose

KES can provide 90cm long hose for customers to purchase or replace. If necessary, click to 🔗 Contact KES

For quick connect hose

KES can provide 50cm long quick connect hose for customers to purchase or replace. If necessary, click to🔗 Contact KES

Problem Of Handles

① Correct handle installation method for double handle faucet

TIP 1: Before installation, the handle should be in a fully closed state

TIP 2: If the base is not aligned during installation, adjust the alignment before installing

🔗Click For a Video of the base adjustment for model L4350

TIP 3: Locking screws can prevent the handle from shifting

This may be caused by damage to the cartridge. You can first try self-checking and adjusting according to the following video:

Applicable model	Click for video
Handle adjustment for L4317	mh5_J72AOaw
How to adjust the wrong handle direction for L4317	PyTrktQeUq8
Handle adjustment for L4350	duXhUgvjKR0

Document & Video

Installation Documents

View Manual BTH217-EN-V5.3

Installation Videos

View Model BTH217-2 Installation Video

BATHROOM

KITCHEN

KES Brushed Finish Towel Rack 2-Tier with Marble Base, CE Certified, Stainless Steel | BTH217-2

Reviews

Sink Faucets

FAQ

From Cartridge

From Spout

From Aerator

From Supply Hose/Quick Connect Hose

① Low Water Pressure/Plumbing Clogged

② Supply Hose Kinked

③ Clogged Aerator

④ Cartridge Clogged/Damaged

Install The Quick Connect Hose

Install The Adapters