Shower System with Tub Spout Bath Shower Faucet Set 10 Inch Rain Shower with Handheld Spray Pressure Balance Chrome, XB6305-CH

USD $238.50

  • Ex Tax: USD $238.50
  • Product Code: XB6305-CH
  • Availability: In Stock

●cUPC Certified Pressure Balance Cartridge: The advanced pressure balance ceramic disc cartridge with cUPC certification can prevent scald injury caused by sudden changes in hot or cold water pressure. If inlet water temperature changes seasonally, please following included instructions to readjust the temperature limit stop. The recommended water temperature for the bath or shower is between 90°F - 110°F.

●Waterfall Tub Spout: This tub shower faucet set features a widespread waterfall tub faucet with large water flow (no less than 5 GPM). This tub spout can fill a common tub (about 53 gallons, 1/2 full) within 8 minutes.

●3-Function In 1 Switch: Select among 10" 304 stainless steel overhead shower, hand shower and tub spout with just ONE switch. This shower valve comes with built-in diverter-simple and elegant design. Ceramic disc diverter valve provides smooth and easy function-switching operations.

●Brass Faucet: One-piece sturdy BRASS faucet body ensures quality and longevity. Threads are standard 1/2" NPT tapered, is easy to installed and leakage proof. Plumber's tape is included for FREE!

●Installation Suggestion: The maximum distance between the stringer and the front surface of finished wall is 3.3" (85mm), and the minimum distance is 2.3"(60mm). The Recommended Distance is 2.7" (70mm) for installation.

-Valve Body: Brass
-Diverter: Built-in
-Shower Arm: 16-Inch Stainless Steel
-Shower Holder: Brass
-Connection Size: Standard 1/2" NPT tapered threads
-Shower Hose: 59-75 inch (1.5-1.9 M) flexible, Tangle-free Design, Stainless Steel and Rubber
-Overhead Shower: 10-Inch Extra Large, Stainless Steel
-Handheld Shower: Brass Body
-Tub Spout: SUS304 Stainless Steel
-Decorative Cover: Stainless Steel
-Cartridge: Pressure Balance Ceramic Disc Cartridge (anti-scalding)
-Finish: Polished Chrome
-Installation: Wall Mount

INSTALLATION NOTE: The maximum distance between the stringer and the front surface of finished wall is 3 11/32" (85mm), and the minimum distance is 2 23/64"(60mm). The Recommended Distance is 2 3/4" (70mm) for installation.

Packaging Includes
1 x 10" Rain Shower Head
1 x Rough-in Valve with Diverter
1 x Handheld Showerhead
1 x Waterfall Tub Spout
1 x Shower Hose
1 x Shower Arm and Escutcheon
1 x Supply Elbow & Shower Holder
1 x Valve Decorative Cover
1 x Hardware Pack
1 x Plumber's Tape
1 x Installation Instruction

Write a review

Write a review

Note: HTML is not translated!
    Bad           Good
KES Cookie Preference Center
By clicking “Accept, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts. Privacy Policy