KES Black Bathroom Faucet Single Handle Type Stainless Steel Faucet Lavatory cUPC Certified Vanity Sink Faucet Matt Black, L3156ALF-BK

• cUPC CERTIFIED: This matte black bathroom faucet meets U.S. and Canada high quality standard (Uniform Plumbing Code), certified by IAPMO.
• ALL METAL: Faucet body, handle are all made from T-304 Stainless Steel, with added 18/8 Chromium/Nickel content to protect against corrosion & rust.
• SUPERIOR AERATOR: KES multi-mesh aerator introduces air into the water stream to produce a larger and whiter stream that is soft to the touch and non-splashing. Flow Rate: 2.2 GPM (8.3 L/min) at 60 PSI. The screen in the aerator is able to trap small debris that would otherwise have made it out of your faucet. Although aerators can get clogged with debris, calcium and limescale, you can easily remove and clean them.
• EASY TO INSTALL: Mounting Hole Diameter: 1.2 to 1.4 inches (32 to 36mm). Max. Deck Thickness: 1.3 inches (35mm). Spout Reach: 4.1 inches (105mm). Water supply hoses, mounting hardware and instruction are included.
• INSURED QUALITY SUPPLY HOSES: Our hoses have nylon braided exterior, which protects against chemical corrosion (commonly caused by detergent) and rusting (yes, stainless steel will become rusty). And the inner tubing is made from PEX, safe for drinking water. With standard 9/16-25 UNEF connectors (of course made from lead-free brass, drinking water safe again!), you can easily connect our hoses with your stop valves. Moreover, our supply hoses have million dollar global insurance coverage.

SPECIFICATIONS

Bathroom Faucet Body Material: SUS 304 Stainless Steel

Valve Type: Ceramic Disc Cartridge

Finish: Matt Black

Number of Handle(s): 1

Number of Hole(s) Installation: 1

Max. Flow Rate: 2.2 GPM (8.3L/min) at 60 PSI.

Water Supply Lines: PEX (Safe for drinking water) inner tubing, nylon braided exterior and lead-free brass connectors, 24-inch long, U.S. Standard 9/16-24 UNEF threads

Dimensions: Overall Height: 6.5 inches (165mm), Spout Height: 4.3 inches (110mm), Spout Reach: 4.1 inches (105mm)

Mounting Hole Diameter: 1.2 to 1.4 inches (32 to 36mm)

Max. Counter Thickness: 1.3 inches (35mm)

NOTICE:

You may find residual water inside your brand new faucet since KES's faucet is 100% tested with pressured-water at factory.

PACKAGE INCLUDED

1 x Matt Black Bathroom Faucet, 2 x Hot/Cold Water Supply Lines, Hardware, Installation Guide